Advances and Challenges in Structural Engineering -

. .

Résumé :
Retrofitting gravity load designed r.c frames using frp.- Condition monitoring of overhead line equipment (ohle) structures using ground-bourne vibrations from train passages.- ...

Biographie:
Seismic risk assessment of pipe rack structures using analytical fragility curves.- Ductility-based seismic vulnerability assessment of rc bridge piers.- Behavior of boxed cold-formed steel as composite beam with rebar as shear connector.- Nonlinear finite element analysis of cfrp shear walls subject to blast loading.- New technology of concrete surface improvement and soil properties.- Probabilistic shear strength of bolted joints in offshore.- Xrdf, sem and compressive strength properties of a new alkali activated fly ash concrete mortar.- Stability of concrete containments in nuclear plants under jet impact loads.- Probabilistic thickness of cfrp plates bonded to reinforced concrete bridge decks. ...

Sommaire:
Application of nano-silica in concrete for bridges in vietnam for sustainable development.- Frp tubes filled with reinforced concrete subjected to cyclic axial loading.- Ultimate flexural capacity prediction of rectangular frp tube beams filled with concrete.- Reinforced concrete multi-rib arch bridge strengthened by changing structural system.- The influence of spectral responses on the structures heights.- Effect of steel slag on cold bituminous emulsion mix.- Post-consumer cullet and potential engineering applications in north America.- Production of building bricks using cement kiln dust ckd waste.- Carbon fiber reinforced polymers (cfrp) for strengthening and seismic retrofitting of historical circular masonry stone columns.- The impact of steel fibers on the properties of self compacting concrete.- Assessing the potential value of a shm deployment on a proposed footbridge.- Estimating seismic demands for displacement-based design of tall buildings.- Verification of mechanism on improvement of drying shrinkage or air permeability on concrete using blast furnace slag sand based on pore structure.- Effect of wet-mat curing time on chloride permeability of concrete bridge decks. The effect of underground stories on the dynamic response of high-rise buildings.- Engineering properties of self-compacting concrete containing class c fly ash and processed slag sand.- Across wind load analysis using cfd for sustainable design of tall structures.- Utilization of ground penetrating radar (gpr) in the non-destructive assessment of frp laminate-concrete bond strength.- Indirect tensile stiffness and permanent deformation of microwave treated cold bituminous emulsion mixtures (cbems) containing cementitious activated waste fly ash.- Risk assessment of open frame platform structures using analytical fragility curves.- ...