Advances in Materials Science and Technology -

. .

Résumé :

1. Development of a Nanocrystalline Cellulose-Based Film to Combat the Staining Potential of
Silver Diamine Fluoride
2. Papilla Reconstruction with Titanium-Prepared Platelet-Rich Fibrin: A Case Report and
Literature Review
3. Evaluation of Platelet Rich Fibrin with Biodentine in Direct Pulp Therapy of
Permanent Teeth - An in Vivo Study
4. Formulation and Characterization of a Novel Drug Loaded Nano-Sponge for Vital Pulp Therapy
5. Comparison of the Retentive Properties of a Removable Partial Denture Clasp
Fabricated by 3-D Printing and Laser Sintering - An In-Vitro Study
6. Characterization of a Novel Drug Delivery System to Enhance Regeneration in Endodontics
7. Effect of Surface Characteristics on Streptococcus Mutans Adhesion on Nickel Titanium (Niti)
and Coaxial Stainless Steel Archwires-A Comparative Prospective Clinical Study
8. Evaluation of Cynodon Dactylon Gel as an Avulsion Medium: An In Vitro Study
9. Evaluation of Antimicrobial Effect of Osteopontin against Caries Causing Bacteria
10. In-Vitro Anti-Bacterial Effect of Lyophilized Umbilical Cord Blood Platelet Rich Plasma against
Streptococcus Mutans
11. Modified Endodontic Bioceramic Sealer Comprising Gold Nanoparticles and PNIPAAm for
Enhanced Antibacterial Ability against Enterococcus Faecalis
12. Bioactive Botanicals: Evaluating Cynodon dactylon's Antioxidant Role in Intracanal Treatment
13. Gas Chromatography Analysis of Bioactive Compounds from Sargassum Wightii Extract for
Periodontal Therapy
14. Insilico Analysis of Compounds Isolated from Mulberry Plant Source for Anti Cariogenicity
15. Comparative Evaluation of Anti-microbial Efficacy of Ocimum Sanctum (Tulsi) extract,
Ocimum Sanctum with Silver Nanoparticles and 0.12% Chlorhexidine: An Invitro Study
16. Demineralized Tooth as Bone Graft Material: A Systematic Review
17. Assessment of Proliferative Effect of Human Adult Peripheral and Umbilical Cord Blood
Platelet-Rich Fibrin Enhanced with Gold Nanoparticles on Human Dental Pulp
Stem Cells: An In-Vitro Study
18. Knocking on Nature's Door-An in Vitro Validation of the Anti-Inflammatory,
Anti-Microbial Efficacy of Convolvulus Pluricaulis
19. Formulation and Assessment of Cytotoxicity of Mg-Cu Alloy in Combination with
Xenogenic Bone Graft-An In-Vitro Study
20. A Novel Formulation of Collagen and Albumin-Based Nanoparticles: Optimization of the
Methodology and in Vitro Validation
21. Bridging the Gap Between Phytopharmaceuticals and Periodontology: Coleus Amboinicus
as a Potential Topical Treatment Modality
22. Lemongrass oil Infused Dental Wafers: A Natural Shield against Oral Pathogens
23. Comparative 3D Finite Element Analysis of Stress Distribution and Displacement Patterns in
Craniofacial Structures Using Hyrax and Memorax Maxillary Expansion Appliances
24. SPT based Liquefaction Prediction of Soils Employing AI Techniques
25. Thermal Stability of the Magnetic Tunnel Junction Stack and their Magnetic Properties
26. Comparative Study of Synthesis Methods of All Inorganic Lead-Free Bromide Perovskite
27. Optimization for Soft Magnetic Properties of [NiFe/Ta]n Multilayer for Magnetic Flux
Concentrator
28. Finite Element Analysis of CNC Dry Machining for Alloy Workpiece using Ansys Workbench
29. Efficient CO2 Capture: Activated Porous Carbon from D-Glucose with Non-Corrosive
Activating Agent
30. Urea-Formaldehyde Microcapsules for the Detection of Microcracks in Polymer Composites
31. Development of Linear Bipolar and Non-Hysteretic Spin Valve GMR Sensor
32. Prediction of Equivalent Plastic Strain in Cold Spray Proces...

Sommaire:

Dr. Srikari S is a Professor in Automotive and Aeronautical Engineering Department. Specialization in Ceramics and composites, coatings, biomaterials, selection of materials and manufacturing processes for aerospace, automotive applications. Working has Head of Bio-materials Research Center, previously worked has Associated Dean Research and Head of the Department. Had worked as PI and Co-PI for more than 8 sponsored projects from DST, AR&DB, GTRE, ICMR, DBT, BRNS and Faurecia Clean Mobility. Sponsored projects were aimed at development and studies on coatings for various applications like biomaterials, energy and sensors. Have conducted several corporate trainings on Selection of Materials and Manufacturing for Automotive and Aerospace Industries. Have supervised more than 30 PG students on material and manufacturing solutions for automotive and aerospace applications and 2 Ph.D. Scholars.

Dr Suresh R is Professor in the Department of Mechanical and Manufacturing Engineering, MS Ramaiah University of Applied Sciences, Bangalore, India. His passion for research runs deep into areas such as the processing of hard and refractory materials, traditional and non-traditional machining, surface Engineering, metal matrix composites, Joining Process, Additive Manufacturing and robotics and automation system. He has organized several national and international conferences and workshops in the field of material science and manufacturing. He has authored more than 150 peer reviewed international journals papers and received research grants from AICTE, DST and KCTU, GoK. He received Outstanding Scientist Award from the Centre for advanced Research and Design Chennai in 2015 and ''Annual Exemplary Faculty-Research 2020'' Award from RUAS in 2020. He is an official reviewer of original research articles in the field of materials and manufacturing. He is also a member of MISTE, SAE India and other Professional Societies, and is an active consultant to many reputed manufacturing industries and R&D organizations.

Dr. Rahul M Cadambi is a Professor at RUAS. He now heads the Composites Materials and Technologies Research Centre (CMTRC) which he was instrumental in establishing in 2017 in collaboration with Kazan National Technical and Research University (KNRTU-KAI), Russia. He is the Centre Coordinator for Centre of Excellence in 'Computational Mechanics' for the Ramaiah Group which is mentored by Prof. J. N. Reddy, Texas A&M University. He was involved in incubating a private company, Valdel Advanced Technologies Pvt. Ltd. in Peenya campus. As an investigator, he is actively involved in various funded and consultancy projects of around Rs. 450 lakhs for various Defence organizations,Armed Forces and other R&D laboratories. He coordinated to enlist RUAS as a nodal centre for BRDs (Indian Air Force). His 16-year-long career is marked by industrial, research and academic accomplishments. His research interests include polymer composites, synthesis of nanomaterials, elastomeric and polymer nanocomposites, damage tolerant design of composite materials and computational modeling of defects, fracture and fatigue processes in composites.