110-220V Plafond PIR Détecteur De Mouvement Détecteur De Lumière Interrupteur 200W Ultra Mince Infrarouge Induction Ajuster Temps Dela - Générique

110-220V Plafond PIR Détecteur De Mouvement Détecteur De Lumière Interrupteur 200W Ultra Mince Infrarouge Induction Ajuster Temps Dela Automatically The body motion sensor can adjust ambient light as you want: when turn to SUN(max), it will work in the daytime and at night; when turn to MOON (min), it will only work under less than circumstance. Time delaying function The body motion sensor can be set according to your desire. The minimum is 5 sec; the maximum is 5 min. Sensitive The motion sensor can automatically monitor closing body and control the light in your room with 0.6-1.5m/s monitoring speed. The motion sensor switch's sensor distance is up to 8m and sensor angle is 360 degree. Compact The body motion sensor is compact, which is unobtrusive and will not occupy much installation space. Indicator lamp The indicator lamp will flash one time each 4 seconds after switching on the power., and flash two times per second when receiving the signal. At the same time, it shows the sensor in the normal monitoring conditions. Scope of application The body motion sensor is widely use on the motion-activated lighting, corridors, bathrooms, basements, warehouses, garages and other . Voltage: 110-220v Model: L/ S Rated load:max 200w Power frequency: 50/60hz Time delay: 5sec to 5 min (adjustable) Ambient light: less then 5-2000lux Monitoring angle: 360 degree Working temperature: -20 to 40 Celsius Detection distance: 8m max(dia.) Power consumption: 0.45w(static 0.1w) Installation height: more than 1.5 -3.5m Monitoring speed: 0.6-1.5m/s Working humidity: Less than 93%RH colour:white Material:plastic size:7.5*7.5*2cm Package Contents: 1 * body motion sensor 2 * expansion snail 2 * screw 1 * English manual Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.